Additional information
| Weight | 6 lbs |
|---|---|
| Dimensions | 9 × 6 × 1 in |
| Quantity | 4 Bolt Kit, 8 Bolt Kit |
Related Products
- Kit includes the axle, end caps, tension nut, and any applicable spacers
- No special tools needed for install or removal
- Makes it easy to switch to a different axle spacing (only certain axles are compatible with certain hubs)
- Allows for easily adjustable bearing preload for a smooth spinning hub
- Includes: 1x 6805 and 1x 6902
- High Precision Steel Bearings
- Precision manufactured to exacting standards
- Low rolling resistance and long life if properly maintained
- Allows a Lefty hub to be mounted in a traditional truing stand.
- Toolless installation.
- Available in 6 color options.
- Allows for the use of a 1-1/8” stem on a Cannondale frame with a Lefty
- For use on Cannondale frames ONLY
- For use with 1.0, Booted or Oliver Leftys ONLY
- Forged steerer tube
- Includes: 1x 6804, 1x 6903, 1x 3803 and 1x 6803
- High Precision Steel Bearings
- Precision manufactured to exacting standards
- Low rolling resistance and long life if properly maintained
- For all of our rear hubs except CX1 and G1 hub models
- Includes: 1x 6804, 1x 6903, and 2x 6803
- High Precision Bearings
- Precision manufactured to exacting standards
- Low rolling resistance and long life if properly maintained
- available in all 10 of our colors to match our hubs perfectly.
- Lasered on Project321 logo.
- Optional expansion plug available.
- Made in the USA.
- For use on non-Cannondale frames with straight 1-1/8” head tubes
- For use with adjustable clamped crown Leftys ONLY
- Forged steerer tube
- Measure your stack height before ordering!
- For use on non-Cannondale frames with straight 1-1/8” head tubes
- For use with 1.0 and Booted Leftys ONLY
- Forged steerer tube
- Measure your stack height before ordering!
- Come in at only 7.5 grams for 6 bolts (Nearly half the weight of steel bolts!).
- Rust and corrosion resistant.
- Long lasting.
- 10mm length.
- T-25 Torx driver is used for installation
- Exceptionally strong and light.
- Rust and corrosion resistant.
- Long lasting.
- Torque is lasered on bolt for convenience.
- Includes a 6.5cc Anti-seize Lubricant packet.
- Weighs in at a competitive 285.4g
- Fully customizable drive system with multiple options:
- 6x2 (6 pawls with 2 pawl engagement) driver that yields 1.7° (216 POE) engagement or our 6x3 (6 pawls with 3 pawl engagement) option that yields 2.5° (144 POE) engagement
- Quiet or loud pawls. QUIET PAWLS ARE TEMPORARILY UNAVAILABLE DUE TO MATERIAL SUPPY ISSUES. THERE IS NO KNOWN AVAILABILITY DATE FOR THE QUIET OPTION AT THIS TIME.
- Very low drag driver. Our new drive system with quiet pawls produces 68% less drag than the system we previously used. Our loud pawls produce 51% less.
- Machined pockets in the drive chamber allow for 25x more oil than our competitors’ hubs - more oil dampens sound slightly but it also extends time between service intervals.
- Fine pitch bearing preload adjustment allows for zero play and compensation for bearing wear.
- Better flange angles eliminate (or drastically reduce) spoke contact with flange, reduce lateral flange loading and create a stiffer and longer lasting wheel build.
- Industry leading warranty: 10 years on hub shell and axle, 3 years on pawls, drive ring, and driver body.
- Award winning tire sealant from the folks that invented tubeless conversion and redefined puncture protection.
- 2 oz bottle.
- Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4" almost instantly.
- Resists freezing to work in environments as cold as -30° F (-34° C).
- Stays liquid for up to seven months.
- Standard freehub oil used in our hub drivers.
- Formulated specifically for pawl type engagement systems.
- Extremely low friction.
- Enough for multiple applications.
- First American manufacturer with a 2.0/Supermax compatible hub!
- Flange spacing that makes the bracing angle better on the disc side.
- Sleek design, CNC engraved logo, pre-polished for extra shine!
- Brilliant colors, long lasting anodization.
- Comes with our anodized Hub Cap and Ti Bolt kit