Product Description
Boost Adapter Rear Axle Kit
$72.00
- Kit includes an axle with a boost adapter disc end cap pressed into it, a 6mm rotor spacer and six M5-.8X16mm bolts
- Works with our G2 Mountain 142x12TA hubs only
- Once installed you will have to re-dish your rear wheel
- Made in Bend, OR
Description
Our Boost Adapter Rear Axle Kit makes updating your G2 Mountain hub to boost spacing a breeze. They are designed to be installed and removed without the use of any special tools so there is no hassle involved and the process is quite simple. The kit includes an axle with the boost adapter disc side end cap pressed in, a 6mm rotor spacer and 6 M5-.8X16mm bolts. You will need to switch your 142X12 drive side end cap and tension nut over from you previous axle to the new supplied axle. Because of the additions to your G2 hub and the 6mm spacer you will have to also re-dish your rear wheel to accommodate the new spacing.
Rigid Quality Control. This is something we take VERY seriously. You will not receive a part with a scratch or ding. We believe it is your job to try and tear this baby up, not ours. We also maintain tight controls on anodizing to provide consistent colors and use an extra long seal to preserve color. Unfortunately, fading is part of the nature of the anodizing process, but the extra long seal helps maintain the original brilliance as long as possible.
Outstanding Customer Service. We pride ourselves on our knowledge and our availability. A real person still answers the phone and we have team of knowledgeable sales and technical advisers available to help you over the phone or via email. Our response times are normally very fast, often same day and our shipping team works hard to get your product as quickly as possible (often same day).
Boost Adapter Rear Axle Kit:
-
- Includes: Axle with boost adapter disc side end cap pressed in, 6mm rotor spacer and six M5-.8x16mm bolts
- This kit is for use with our G2 Mountain 142x12TA only
- Swap over drive side end cap and tension nut from 142x12TA axle and install on the axle provided in the kit
- The rear wheel will have to be re-dished once adapter kit is installed before riding the wheel
- 10 year warranty
- Made in Bend, OR
- Please Note: This kit only works with our G2 Mountain hubs. They are identifiable by a BLACK driver body.
Tech Videos:
Additional information
| Weight | .25 lbs |
|---|---|
| Dimensions | 9 × 6 × 1 in |
| Hub Option | G2 Geared Rear Hub (black freehub) |
| Axle Options | Boost Adapter 148x12TA Kit |
+
What hubs does this kit work with? The Boost Adapter Rear Axle Kit only is compatible with our G2 Mountain Rear Hub with a 142x12TA.
+
How do I know if I have a G2 Mountain hub? One way to see if you have a G1 or G2 hub is to check the color of the driver body. G2 hubs have a Black driver body. Another way to tell is to measure the hub. Here is a link to our hub dimensions chart. If it does have a black driver but is a road driver or uses a road cassette then that is our CX1 hub and is not compatible.
+
How is this product shipped? We offer FREE SHIPPING (within the USA) on this product via USPS unless otherwise requested or shipped with other items. (changes may be subject to price increase).
+
Can I ship to a different address from my billing address? Unfortunately, No. For security reasons Project321 will only ship to the billing address or address associated with the PayPal account used to purchase the item. PayPal does allow the addition of multiple addresses on an account.
Related Products
- Weighs in at a competitive 281.4
- Fully customizable drive system with multiple options:
- 6x2 (6 pawls with 2 pawl engagement) driver that yields 1.7° (216 POE) engagement or our 6x3 (6 pawls with 3 pawl engagement) option that yields 2.5° (144 POE) engagement
- Quiet or loud pawls.
- XDR or HG driver.
- Very low drag driver. Our new drive system with quiet pawls produces 68% less drag than the system we previously used. Our loud pawls produce 51% less.
- Machined pockets in the drive chamber allow for 25x more oil than our competitors’ hubs - more oil dampens sound slightly but it also extends time between service intervals.
- Fine pitch bearing preload adjustment allows for zero play and compensation for bearing wear.
- Better flange angles eliminate (or drastically reduce) spoke contact with flange, reduce lateral flange loading and create a stiffer and longer lasting wheel build.
- Industry leading warranty: 10 years on hub shell and axle, 3 years on pawls, drive ring, and driver body.
- Come in at only 7.5 grams for 6 bolts (Nearly half the weight of steel bolts!).
- Rust and corrosion resistant.
- Long lasting.
- 10mm length.
- T-25 Torx driver is used for installation
- available in all 10 of our colors to match our hubs perfectly.
- Lasered on Project321 logo.
- Optional expansion plug available.
- Made in the USA.
- First American manufacturer with a 2.0/Supermax compatible hub!
- Flange spacing that makes the bracing angle better on the disc side.
- Sleek design, CNC engraved logo, pre-polished for extra shine!
- Brilliant colors, long lasting anodization.
- Comes with our anodized Hub Cap and Ti Bolt kit
- Weighs in at a competitive 275.3g
- Fully customizable drive system with multiple options:
- 6x2 (6 pawls with 2 pawl engagement) driver that yields 1.7° (216 POE) engagement or our 6x3 (6 pawls with 3 pawl engagement) option that yields 2.5° (144 POE) engagement
- Quiet or loud pawls.
- XD or HG driver.
- Very low drag driver. Our new drive system with quiet pawls produces 68% less drag than the system we previously used. Our loud pawls produce 51% less.
- Machined pockets in the drive chamber allow for 25x more oil than our competitors’ hubs - more oil dampens sound slightly but it also extends time between service intervals.
- Fine pitch bearing preload adjustment allows for zero play and compensation for bearing wear.
- Better flange angles eliminate (or drastically reduce) spoke contact with flange, reduce lateral flange loading and create a stiffer and longer lasting wheel build.
- Industry leading warranty: 10 years on hub shell and axle, 3 years on pawls, drive ring, and driver body.
- For use on non-Cannondale frames with straight 1-1/8” head tubes
- For use with 1.0 and Booted Leftys ONLY
- Forged steerer tube
- Measure your stack height before ordering!
- Includes: 1x 6805 and 1x 6902
- High Precision Steel Bearings and Kogel Ceramic Bearing Kit options available
- Precision manufactured to exacting standards
- Low rolling resistance and long life if properly maintained
- Weighs in at a competitive 282.3g
- Fully customizable drive system with multiple options:
- 6x2 (6 pawls with 2 pawl engagement) driver that yields 1.7° (216 POE) engagement or our 6x3 (6 pawls with 3 pawl engagement) option that yields 2.5° (144 POE) engagement
- Quiet or loud pawls.
- XD, HG or Microspline** driver.
- Very low drag driver. Our new drive system with quiet pawls produces 68% less drag than the system we previously used. Our loud pawls produce 51% less.
- Machined pockets in the drive chamber allow for 25x more oil than our competitors’ hubs - more oil dampens sound slightly but it also extends time between service intervals.
- Fine pitch bearing preload adjustment allows for zero play and compensation for bearing wear.
- Better flange angles eliminate (or drastically reduce) spoke contact with flange, reduce lateral flange loading and create a stiffer and longer lasting wheel build.
- Industry leading warranty: 10 years on hub shell and axle, 3 years on pawls, drive ring, and driver body.
- Award winning tire sealant from the folks that invented tubeless conversion and redefined puncture protection.
- 2 oz bottle.
- Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4" almost instantly.
- Resists freezing to work in environments as cold as -30° F (-34° C).
- Stays liquid for up to seven months.
- Includes: 2x 6805
- High Precision Steel Bearings and Kogel Ceramic Bearing Kit options available
- Precision manufactured to exacting standards
- Low rolling resistance and long life if properly maintained
- Includes: 1x 7804, 2x 17287, and 1x 6808
- ABEC 5 Enduro Bearings and Ceramic Bearing Kit options available
- Precision manufactured to exacting standards
- Low rolling resistance and long life if properly maintained
- Standard freehub oil used in our hub drivers.
- Formulated specifically for pawl type engagement systems.
- Extremely low friction.
- Enough for multiple applications.
- Weighs in at a competitive 285.4g
- Fully customizable drive system with multiple options:
- 6x2 (6 pawls with 2 pawl engagement) driver that yields 1.7° (216 POE) engagement or our 6x3 (6 pawls with 3 pawl engagement) option that yields 2.5° (144 POE) engagement
- Quiet or loud pawls.
- Very low drag driver. Our new drive system with quiet pawls produces 68% less drag than the system we previously used. Our loud pawls produce 51% less.
- Machined pockets in the drive chamber allow for 25x more oil than our competitors’ hubs - more oil dampens sound slightly but it also extends time between service intervals.
- Fine pitch bearing preload adjustment allows for zero play and compensation for bearing wear.
- Better flange angles eliminate (or drastically reduce) spoke contact with flange, reduce lateral flange loading and create a stiffer and longer lasting wheel build.
- Industry leading warranty: 10 years on hub shell and axle, 3 years on pawls, drive ring, and driver body.
- Weight 291.4g
- Fully customizable drive system with multiple options:
- 6x2 (6 pawls with 2 pawl engagement) driver that yields 1.7° (216 POE) engagement or our 6x3 (6 pawls with 3 pawl engagement) option that yields 2.5° (144 POE) engagement
- Quiet or loud pawls.
- XD, Microspline ** or HG driver.
- Very low drag freehub. Our new drive system with quiet pawls produces 68% less drag than the system we previously used. Our loud pawls produce 51% less.
- Machined pockets in the drive chamber allow for 25x more oil than our competitors’ hubs - more oil dampens sound slightly but it also extends time between service intervals.
- Fine pitch bearing preload adjustment allows for zero play and compensation for bearing wear.
- Better flange angles eliminate (or drastically reduce) spoke contact with flange, reduce lateral flange loading and create a stiffer and longer lasting wheel build.
- Industry leading warranty: 10 years on hub shell and axle, 3 years on pawls, drive ring, and driver body.