Showing all 6 results
$415.00 – $600.90
Select options
- Weighs in at a competitive 282.3g
- Fully customizable drive system with multiple options:
- 6x2 (6 pawls with 2 pawl engagement) driver that yields 1.7° (216 POE) engagement or our 6x3 (6 pawls with 3 pawl engagement) option that yields 2.5° (144 POE) engagement
- Quiet or loud pawls.
- XD, HG or Microspline** driver.
- Very low drag driver. Our new drive system with quiet pawls produces 68% less drag than the system we previously used. Our loud pawls produce 51% less.
- Machined pockets in the drive chamber allow for 25x more oil than our competitors’ hubs - more oil dampens sound slightly but it also extends time between service intervals.
- Fine pitch bearing preload adjustment allows for zero play and compensation for bearing wear.
- Better flange angles eliminate (or drastically reduce) spoke contact with flange, reduce lateral flange loading and create a stiffer and longer lasting wheel build.
- Industry leading warranty: 10 years on hub shell and axle, 3 years on pawls, drive ring, and driver body.
-
**IMPORTANT!!! Due to a large drive side flange spacing our hubs are ONLY COMPATIBLE WITH 51T MICROSPLINE CASSETTES. This feature of our hubs is designed to maximize drive side bracing angle and rear wheel lateral stiffness. This has been a feature of our hub design since before Microspline was released. Please note that when purchasing a hub set with Microspline driver or upgrading to Microspline driver on an existing hub set youwill be limited to 51t only. Thank you!
$415.00 – $568.65
Select options
- Weighs in at a competitive 281.4
- Fully customizable drive system with multiple options:
- 6x2 (6 pawls with 2 pawl engagement) driver that yields 1.7° (216 POE) engagement or our 6x3 (6 pawls with 3 pawl engagement) option that yields 2.5° (144 POE) engagement
- Quiet or loud pawls.
- XDR or HG driver.
- Very low drag driver. Our new drive system with quiet pawls produces 68% less drag than the system we previously used. Our loud pawls produce 51% less.
- Machined pockets in the drive chamber allow for 25x more oil than our competitors’ hubs - more oil dampens sound slightly but it also extends time between service intervals.
- Fine pitch bearing preload adjustment allows for zero play and compensation for bearing wear.
- Better flange angles eliminate (or drastically reduce) spoke contact with flange, reduce lateral flange loading and create a stiffer and longer lasting wheel build.
- Industry leading warranty: 10 years on hub shell and axle, 3 years on pawls, drive ring, and driver body.
$415.00 – $600.90
Select options
- Weight 291.4g
- Fully customizable drive system with multiple options:
- 6x2 (6 pawls with 2 pawl engagement) driver that yields 1.7° (216 POE) engagement or our 6x3 (6 pawls with 3 pawl engagement) option that yields 2.5° (144 POE) engagement
- Quiet or loud pawls.
- XD, Microspline ** or HG driver.
- Very low drag freehub. Our new drive system with quiet pawls produces 68% less drag than the system we previously used. Our loud pawls produce 51% less.
- Machined pockets in the drive chamber allow for 25x more oil than our competitors’ hubs - more oil dampens sound slightly but it also extends time between service intervals.
- Fine pitch bearing preload adjustment allows for zero play and compensation for bearing wear.
- Better flange angles eliminate (or drastically reduce) spoke contact with flange, reduce lateral flange loading and create a stiffer and longer lasting wheel build.
- Industry leading warranty: 10 years on hub shell and axle, 3 years on pawls, drive ring, and driver body.
-
**IMPORTANT!!! Due to a large drive side flange spacing our hubs are ONLY COMPATIBLE WITH 51T MICROSPLINE CASSETTES. This feature of our hubs is designed to maximize drive side bracing angle and rear wheel lateral stiffness. This has been a feature of our hub design since before Microspline was released. Please note that when purchasing a hub set with Microspline driver or upgrading to Microspline driver on an existing hub set youwill be limited to 51t only. Thank you!
$415.00 – $600.90
Select options
- Weighs in at a competitive 275.3g
- Fully customizable drive system with multiple options:
- 6x2 (6 pawls with 2 pawl engagement) driver that yields 1.7° (216 POE) engagement or our 6x3 (6 pawls with 3 pawl engagement) option that yields 2.5° (144 POE) engagement
- Quiet or loud pawls.
- XD or HG driver.
- Very low drag driver. Our new drive system with quiet pawls produces 68% less drag than the system we previously used. Our loud pawls produce 51% less.
- Machined pockets in the drive chamber allow for 25x more oil than our competitors’ hubs - more oil dampens sound slightly but it also extends time between service intervals.
- Fine pitch bearing preload adjustment allows for zero play and compensation for bearing wear.
- Better flange angles eliminate (or drastically reduce) spoke contact with flange, reduce lateral flange loading and create a stiffer and longer lasting wheel build.
- Industry leading warranty: 10 years on hub shell and axle, 3 years on pawls, drive ring, and driver body.
-
**IMPORTANT!!! Due to a large drive side flange spacing our hubs are ONLY COMPATIBLE WITH 51T MICROSPLINE CASSETTES. This feature of our hubs is designed to maximize drive side bracing angle and rear wheel lateral stiffness. This has been a feature of our hub design since before Microspline was released. Please note that when purchasing a hub set with Microspline driver or upgrading to Microspline driver on an existing hub set youwill be limited to 51t only. Thank you!
$415.00 – $600.90
Select options
- Weighs in at a competitive 285.4g
- Fully customizable drive system with multiple options:
- 6x2 (6 pawls with 2 pawl engagement) driver that yields 1.7° (216 POE) engagement or our 6x3 (6 pawls with 3 pawl engagement) option that yields 2.5° (144 POE) engagement
- Quiet or loud pawls.
- Very low drag driver. Our new drive system with quiet pawls produces 68% less drag than the system we previously used. Our loud pawls produce 51% less.
- Machined pockets in the drive chamber allow for 25x more oil than our competitors’ hubs - more oil dampens sound slightly but it also extends time between service intervals.
- Fine pitch bearing preload adjustment allows for zero play and compensation for bearing wear.
- Better flange angles eliminate (or drastically reduce) spoke contact with flange, reduce lateral flange loading and create a stiffer and longer lasting wheel build.
- Industry leading warranty: 10 years on hub shell and axle, 3 years on pawls, drive ring, and driver body.
$415.00 – $600.90
Select options
- Weight 291.4g
- Fully customizable drive system with multiple options:
- 6x2 (6 pawls with 2 pawl engagement) driver that yields 1.7° (216 POE) engagement or our 6x3 (6 pawls with 3 pawl engagement) option that yields 2.5° (144 POE) engagement
- Quiet or loud pawls.
- XD, HG or Microspline** driver.
- Very low drag driver. Our new drive system with quiet pawls produces 68% less drag than the system we previously used. Our loud pawls produce 51% less.
- Machined pockets in the drive chamber allow for 25x more oil than our competitors’ hubs - more oil dampens sound slightly but it also extends time between service intervals.
- Fine pitch bearing preload adjustment allows for zero play and compensation for bearing wear.
- Better flange angles eliminate (or drastically reduce) spoke contact with flange, reduce lateral flange loading and create a stiffer and longer lasting wheel build.
- Industry leading warranty: 10 years on hub shell and axle, 3 years on pawls, drive ring, and driver body.
-
**IMPORTANT!!! Due to a large drive side flange spacing our hubs are ONLY COMPATIBLE WITH 51T MICROSPLINE CASSETTES. This feature of our hubs is designed to maximize drive side bracing angle and rear wheel lateral stiffness. This has been a feature of our hub design since before Microspline was released. Please note that when purchasing a hub set with Microspline driver or upgrading to Microspline driver on an existing hub set youwill be limited to 51t only. Thank you!